Air ducts transitions, stubs, ducks, etc.

The straight parts of the ducts are an element of the ventilation system designed to create straight (trunk) sections of the duct network.

The taps are designed to change the trajectory of the air flow to the required angle.

Insets are an element of the ventilation system designed to connect one section of the duct to another from the side (perpendicular). Depending on their shape, the insets can be round or straight.

The transitions have a high throughput and also fit snugly to the surface. These properties allow you to save the useful volume of the room. The use of transitions allows you to reduce the size of ventilation ducts during design.

The plug is used to reliably cover the end of the duct or shaped products standing at the end of the system, as well as to seal and create thrust (pressure) in the ventilation system.

The nipple is a tube made of galvanized sheet steel, which provides a tight, high-tight connection of the parts of the air line into a single system.

A tee is an element of a ventilation system designed to create branches from the main pipeline in ventilation systems.

The duct crosspiece not only connects different ducts to each other, but also acts as a so-called "crossroads" for the airflow and distributes it evenly.

The weft is a transitional shaped part designed to connect two air ducts located at different height levels.

Aspiration systems. Aspiration is the most difficult type of room ventilation. The essence of aspiration is that polluted air with particles of harmful substances collects in one place. The aspiration system prevents polluted air from spreading through the room.

Models: 100x100, 100x100 2.0, 100x100 aisi 430 0.5, 100x100 L=1000, 150x150 aisi 430 0.5, 200x100 aisi 430 0.5, F100, F100 2.0, F100 aisi 430 0.5, F100 L=1000, F125, F125 aisi 430 0.5, F160, F160 aisi 430 0.5, F180 2.0, F200, F200 aisi 430 0.5, F225 2.0, F250, F250 aisi 430 0.5, F315, F315 2.0, F315 aisi 430 0.5, F400, F450 2.0, F560, F560 aisi 430 0.5, F630, F630 2.0, F710, F800, F800 aisi 430 0.5, F1000 aisi 430 0.5, No. 20, No. 30, collar mortise, round mortise, straight mortise, round plug, rectangular plug, round crosspiece, rectangular crosspiece, round nipple, round shaped transition, straight rectangular shaped transition, aspiration system, round tee, rectangular tee, round weft, rectangular weft, round shaped element segmental 45° tap, element round shaped segment outlet 45° corrugated, round shaped segment outlet element 90°, round shaped segment outlet element 90° corrugated, straight shaped segment outlet element 45°, straight shaped segment outlet element 90°.